WTB GEW bolt ejector.

General Information & Facts Pertaining To The German Model 1888 Commission Rifle
792man
Posts: 9
Joined: Wed May 17, 2017 2:01 pm

WTB GEW bolt ejector.

Unread postby 792man » Thu May 18, 2017 1:28 pm

Looking for this ..gew bolt head ejector..not sure if they are rare like the bolt heads..Thanks in advance..

gamblrgrogan
Posts: 92
Joined: Wed Mar 23, 2016 6:24 pm

Re: WTB GEW bolt ejector.

Unread postby gamblrgrogan » Thu May 18, 2017 6:32 pm

I have both extractor & ejector if you want to buy one or the ejector can be made with a mechanics wrench or piece of steel

792man
Posts: 9
Joined: Wed May 17, 2017 2:01 pm

Re: WTB GEW bolt ejector.

Unread postby 792man » Thu May 18, 2017 9:11 pm

Is there a post on how to make one from tool steel ? I have one I can copy / match in my GEW 88 rifle bolt ..Thanks

gamblrgrogan
Posts: 92
Joined: Wed Mar 23, 2016 6:24 pm

Re: WTB GEW bolt ejector.

Unread postby gamblrgrogan » Sat May 20, 2017 11:01 pm

If you have an ejector to copy off you should do well somewhere on the net I seen a few photos showing how they done it but my google fu is not working & I cant find it now but I will look further

792man
Posts: 9
Joined: Wed May 17, 2017 2:01 pm

Re: WTB GEW bolt ejector.

Unread postby 792man » Mon May 22, 2017 8:13 am

Will Get the one I have am restoring a Erfurt carbine..

gamblrgrogan
Posts: 92
Joined: Wed Mar 23, 2016 6:24 pm

Re: WTB GEW bolt ejector.

Unread postby gamblrgrogan » Mon May 22, 2017 7:58 pm

Sorry been out of town I will keep looking for some pics but its a lot easier to make when you have one to copy and cool its a carbine don't see many of them 8-)

792man
Posts: 9
Joined: Wed May 17, 2017 2:01 pm

Re: WTB GEW bolt ejector.

Unread postby 792man » Thu May 25, 2017 8:10 pm

I am almost at 100 % of the needed parts ..just time to fit /modify the action into the clone stock ..will get some pics posted..they are an interesting carbine I regret passing up one about 10 yrs ago ..Now they are a premium.If you dont mind me asking..Do you own one ? I need measurements of the sling slot distance from buttplate am
nd from edge of the stock. Bill

gamblrgrogan
Posts: 92
Joined: Wed Mar 23, 2016 6:24 pm

Re: WTB GEW bolt ejector.

Unread postby gamblrgrogan » Mon May 29, 2017 9:42 pm

Sorry been busy I don't own a Kar88 but do own a Gew91 from buttplate edge to slot edge measures 2 & 3/4 inch's look forward to see your pics of project

792man
Posts: 9
Joined: Wed May 17, 2017 2:01 pm

Re: WTB GEW bolt ejector.

Unread postby 792man » Thu Jun 01, 2017 10:44 pm

Thanks for the measurements..haven't had much time to spend on it with working & honey do"s..need to get a decent vise set up to hold the stock while working /in letting the action etc. That will help a Lot..